Detection Zones - Nexcom NCr-302-VHR User Manual

Chapter 2: Camera Configuration

Detection Zones

This section shows the live video from the camera, the screen is divided
into 5x5 rectangular boxes, to setup motion detection, please follow the
instructions below.
1. Check the Enable motion detection option, and specify the sensitivity
level.
2. In the live video screen below, select the desired area for motion
detection by clicking on the rectangular box. The border of the box will
turn red indicating that it is selected. You can select multiple boxes, up
to 5x5 boxes can be selected.
3. Press the Save button once all the desired areas are selected for the
changes to take effect.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Highlighted
box
35
To remove motion detection from an area, click the box to deselect it, then
press the Save button for the changes to take effect.
Area with
motion detect
enabled
NCr-302-VHR User Manual