Table of Contents
Advertisement
Chapter 2: Camera Configuration
Maintenance
This section is used to restart the IP camera, or restore it to factory default
settings.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Maintain
Restart
Click this button to reboot the camera.
Reset to Default
Click this button to restore all the camera's setting back to factory default.
Camera Name Settings
Camera Name
Specify a name for the camera. The name will be displayed in the upper left
corner on the live video stream of the camera. To enable this, make sure the
option Display Camera Name in the Overlay Settings menu is checked.
For information on the Overlay Settings menu, please refer to page 18.
Save
Save button to apply the configurations, click on this button once all the
settings are confirmed for the new changes to take effect.
Reset
Reset button to discard all the settings applied.
DC-Iris Calibration
Press the button to start the DC-Iris Calibration.
36
NCb-311 User Manual
Advertisement
Table of Contents
