Deleting A Recording; Deleting All Recordings; Adjusting The Recording Indicator; Displaying Recording Feature Status - Konftel 300IP User Manual

RecoRDInG

DeleTInG a RecoRDInG

 Select MenU > RecoRDInG > eRase fIle (4,3).
 Mark the folder you want and press oK.
 Mark the recording to be deleted and press oK.
 Confirm that you really want to delete the recording by pressing oK again, or cancel
the deletion of a recording by pressing c.

DeleTInG all RecoRDInGs

 Select MenU > RecoRDInG > eRase all (4,4).
 Confirm that you really want to delete all recordings by pressing oK again, or cancel
the deletion of a recording by pressing c.

aDJUsTInG THe RecoRDInG InDIcaToR

A short beep is heard every 20 seconds so that all the parties in the call know it is
being recorded. This feature can be turned off.
 Select MenU > RecoRDInG > seTTInGs (4,5).
 Select your choice and press oK to confirm.

DIsPlaYInG RecoRDInG feaTURe sTaTUs

 Select MenU > RecoRDInG > sTaTUs (4,6).
The display screen indicates the number of recordings, the total length of recorded calls and
how many hours of recording time are left before the memory card is full.
24
The Konftel 300IP has two groups of settings: Basic and Advanced. You must enter the
Admin. PIN code to access the advanced settings.
The simplest way to make settings is using a PC and the Konftel 300IP web inter-
face (see page 32).

basIc seTTInGs

select default account
If the phone has two registered accounts, you can choose one of them as default.
 Select MenU > seTTInGs > basIc > accoUnTs (5,1,1).
 Select ACCOUNT 1 or ACCOUNT 2 and press oK to confirm.
The account name is displayed. NOT CONFIGURED will be displayed if the selected account is
not registered.
selecting languages
 Select MenU > seTTInGs > basIc > lanGUaGe (5,1,2).
 Select the language you want and press oK to confirm.
Deactivating keypad tones
You can select whether or not you want a tone to be heard when you press a button.
Note that this setting does not affect the tone you hear when you dial a number in call
mode.
 Select MenU > seTTInGs > basIc > KeY Tone (5,1,3).
 Select your choice and press oK to confirm.
adjusting ring level volume
 Select MenU > seTTInGs > basIc > RInG leVel (5,1,4).
 Select your choice and press oK to confirm.
 There are six volume levels plus a silent mode. You will hear the ring tone for each
level you select. If you select silent mode, an LED on the phone flashes when an
incoming call is received.
adjusting sound (equaliser)
The sound reproduction can be adjusted to the required pitch (SOFT, NEUTRAL and
BRIGHT).
 Select MenU > seTTInGs > basIc > eQUalIZeR (5,1,5).
 Select your choice and press oK to confirm.

seTTInGs

25