Assembly And Start-Up - Toro 21012 Operator's Manual

21012
without AutoMatic Drive System
© 2004 by The Toro Company
21014
with AutoMatic Drive System
1
3

Assembly and start-up

3.1 Become acquainted with your lawn mower
3.2 Setting the lawn mower up
3.3 Mounting the handlebar
3.4 Attaching the grass collecting device
3.5 Adjusting the cutting height
3.6 Proper cutting height for recycling
3.7 Filling in the motor oil
3.8 Filling up the tank
3.1 Become acquainted with your lawn mower
1 Safety lever for motor start/stop
Function - refer to chapter start-up
2 Vario-Handle for self propel (only on mowers with
AutoMatic Drive)
This handle selects self propelling on-off operation, as well
the mowing speed.
3 cutting height adjusting handle (6 steps)
4 Cutting height scale
Scale indicating the adjusted cutting height
5 "Smart Wheel" scale
Scale for adjusting the proper cutting height
6 Ejection door
Guard for the ejection opening which must not be removed. It
also serves as a stacker for the cut grass when mowing
without collecting device.
7 Grass-collecting device
8 Recycler - plug
refer to chapter operation
9 Handlebar start
10 Fuel tank
Contents: approx. 1.1 liters, operating time: approx. 1 h / tank
filling
11 Oil filling pipe and oil measuring stick
refer to chapter start-up
12 Air filter
Cleaning refer to chapter maintenance and upkeep
13 Spark plug connector
plug on spark plug before start-up
14 Wash-out Port
7