Advertisement
2.6
Safe maintenance and storage
1. Ensure that all nuts, bolts and screws are tightened to
guarantee a safe operating state.
2. If there is fuel in the tank, never place the mower where there
is danger that the gasoline vapours might catch fire from open
flames or sparks.
3. Let the motor cool down before you put the mower into a
closed room.
4. In order to avoid fire risk, keep the area of motor, exhaust,
battery case and fuel tank free from grass, leaves or excessive
amounts of grease/oil.
5. Check the grass collecting bag at short, regular intervals for
wear and damages.
6. For safety reasons, worn or damaged parts are to be ex-
changed.
7. If the fuel tank has to be emptied, this has to be done outdoors.
6
2.7
List of symbols
Warning
Read the instructions for use before starting
Third parties have to be kept out of the hazardous
area
Warning! Rotating blade!
Keep hands and feet off
Disconnect spark plug before service!
Electrical shock / electrocution
Keep dry
Disconnect main plug before
servicing the cutting tool
Always keep connecting cable away from blade.
If the blade catches or cuts the cord, immediately
unplug the cable from the outlet.
high motor speed
low motor speed (idle)
cold start injection (starting aid)
push starting aid 3 times
pull up lever for starting up
pull starter rope
"Adjustment of cutting height"
electro start (motor on)
motor stop
clutch disengaged
clutch engaged
wheel
wheel drive
© 2004 by The Toro Company
Hide quick links:
Advertisement
