Advertisement
10
10
3.7
Refilling the motor oil (Fig. 10)
With outside temperatures above 4°C, use SAE 10 W-
30 HD or 10 W-40 HD. With temperatures below 4°C,
use SAE 5 W-20 or 5 W-30 HD.
1. Place mower on a horizontal surface.
2. Open cover and fill in approx. 0.6 liters of motor oil and insert
oil measuring stick up to its limit stop (do not screw in).
3. Take out oil measuring stick and check oil level.
Oil level may not be above the "Full" mark and not
below the "ADD" mark. If required, drain some of the
oil.
4. Screw cover on oil filling pipe and tighten with manual force.
First oil exchange after 5 operating hours. After that,
every 50 operating hours. Check the oil level before
each start-up.
11
3.8
Filling up the tank (Fig. 11)
Fill in regular grade unleaded petrol only. Do not mix
fuel with oil. Do not use any fuel that has been stored
for a long period of time.
Only store reserve fuel in containers approved for this.
To fill up the tank, turn off motor. Only open tank while
motor is turned off. Only fill up the tank outdoors. Do
not inhale fuel vapors.
Remove any overflown fuel before starting.
No smoking, no open fire, no open light.
After sufficient fuel has been filled in, close the tank cover with
manual force and wipe off spilled fuel, if any.
Do not fill up fuel up to the filling pipe, but leave an "expansion
space" of approx. 1 cm.
© 2004 by The Toro Company
Hide quick links:
Advertisement
