Biamp MCA Series Operation Manual

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A grounding
type plug has two blades and a third grounding
prong. The third prong is provided for your safety.
When the provided plug does not fit into your
outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
Explanation of safety related markings and symbols which appear on the outside of the apparatus.
Lightning Bolt: Hazardous Live voltages present when this unit is in operation. Do not touch terminals
marked with this symbol while the unit is connected to live power.
Exclamation Point: Replace components (i.e. fuses) only with the values specified by the
manufacturer. Failure to do so will compromise safe operation of this unit.
Biamp Systems, 10074 S.W. Arctic Drive, Beaverton, Oregon 97005 U.S.A.
MCA Series
Multi-Channel Amplifiers

Operation Manual

11) Only use attachments/accessories specified by
the manufacturer.
12) Unplug this apparatus during lightning storms or
when unused for long periods of time.
13) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been
dropped.
14) WARNING - To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or
moisture.
15) The MAINS plug or appliance coupler is used
as the disconnect device. This disconnect device
must remain redily accessible after installation.
16) In order to comply with international safety
requirements for operating temperature, clearance
of at least 5cm or 1.97" must be maintained
between this device and other rack-mounted
devices. This spacing will ensure that all exposed
metal surfaces are safe to touch.
(503) 641-7287 www.biamp.com