Firebox Parts; Baffle Removal & Replacement - Lopi Evergreen Owner's Manual

30

Firebox Parts

ID # Description
1 Secondary Air Tubes
2 Air Tube Pins
3 Front Baffle Support
4 Baffle Plates (ceramic)
5 Baffle Insulation
Baffle Removal & Replacement
The baffle is held up by the 4 air tubes. Make sure to support the baffle while removing the air tubes.

Remove the two front air tubes. Lift the front baffle up, twist it forward and remove.

Remove the bypass yoke assembly (pull the bypass forward, unscrew the extension rod from the
yoke). The yoke may be removed by reaching through the bypass hole.

Remove the bypass slider (it may be removed by reaching through the bypass hole). Remove the
bypass support (lift it up from below, turn it sideways, slide it forward, and remove it from the front).

Remove the baffle insulation (take care – it is fragile and may be covered in flyash).

The baffle plates may be removed to finalize baffle removal. To replace the baffle components, follow
the instructions in reverse order.
© Travis Industries
Maintaining Your Appliance
9
10
3
Qty. Part #
98900247
250-03658
1 250-03597
2 250-03598
1 250-03599
100-01438
8
7
6
5
4
1
2
ID # Description
6 Baffle Insulation Protectors
7 Bypass Support
8 Bypass Slider
9 Bypass Yoke
10 Bypass Ext. Rod w Pull Ring
Qty. Part #
2 250-03659
1 250-03594
1 250-03596
1 250-03590
1 98900333
4160303