GreenStart Igniter Installation Addendum
This stove may use the optional GreenStart igniter. When installing, follow the instructions listed under
the "Cape Cod" heading in the installation instructions included with the igniter. When installing, make
sure to accommodate the following:
(a) Pry out this cover plate on the back of the stove.
(b) Replace the right backwall firebrick with the igniter firebrick included with the igniter (it has a hole it in).
(c) Make sure to attach the cover plate and cover box to the stove after the igniter is in place (these
components, along with screws, are included with the stove).
© Travis Industries
Optional Equipment
F
F
F
F
F
F
F
1
F
1
1
2
1
F
100-01438
F
F
F
37
4160303