Monthly Maintenance (While Appliance Is In Use); Door And Glass Inspection; Door Adjustment - Lopi Evergreen Owner's Manual

Monthly Maintenance (while appliance is in use)

Make sure the appliance has fully cooled prior to conducting service.

Door and Glass Inspection

The door must form an air-tight seal to the firebox for the stove to work correctly. Inspect the door gasket
to make sure it forms an air-tight seal to the firebox.
If the glass is damaged,
replace it - see
"Replacement Parts" for
details.
The door latch should pull the door against the face of the stove (but not so tight as to not allow full
handle rotation). If the latch requires adjustment, follow the directions below.

Door Adjustment

The door latch should hold the door tightly against the stove, while allowing the handle to rotate fully. If
the latch requires adjusting, follow the directions below.
Loosen the bottom nut with a 11.1125mm
(7/16") wrench (see arrow to the right). Tap
the bottom nut inwards, moving the door
catch inwards. Tighten the nut and test
operation. You may need to repeat this
process, either moving the nut inwards or
outwards, until the door catch is in the correct
position.
© Travis Industries
Maintaining Your Appliance
Use RTV high
temperature silicone to
adhere any loose
gasket.
100-01438
Severely frayed or thread-bare
gasket should be replaced.
27
Door Handle
4160303