COOLING SYSTEM
Filling the cooling system
14.5
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
–
Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.
Main work
–
Stand the motorcycle upright.
–
Place a suitable container under the engine.
–
Remove screw
–
Completely drain the coolant.
–
Mount screw
Guideline
Plug, drain hole of water pump
600616-10
Follow-up work
–
Install the engine guard. (
x
. Take off the radiator cap.
1
with a new seal ring and tighten it.
1
p. 97)
M10x1
15 Nm
(11.1 lbf ft)
149