ELECTRICAL SYSTEM
Checking the headlight setting
13.12
A
0 0 A
Adjusting the headlight range
13.13
–
Stand the vehicle upright on a horizontal surface in front of a light wall and make a
mark at the height of the center of the low beam headlight.
–
Make another mark at a distance
Guideline
B
0 0 B
Distance
B
–
Position the vehicle vertically at a distance
Guideline
Distance
A
400726-10
–
The rider, with luggage and a passenger if applicable, now sits down on the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
For a ready-to-operate motorcycle with a rider, and with luggage and a passenger if
applicable, the light-dark boundary must lie exactly on the lower mark.
»
If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range. (
Preliminary work
–
Check the headlight setting. (
under the first mark.
B
5 cm (2 in)
in front of the wall.
A
5 m (16 ft)
p. 142)
p. 142)
142