Furuno FCV-627 Operator's Manual page 23

1. OPERATION
Alarm range
(width from
starting depth)
Alarm marker
- ACCU-FISH, Fish School, Bottom: Left side
- Bottom lock: Center
10)Select [Span] and press the ENTER
key.
ACCU-FISH,
Fish School
alarms
11)Enter the alarm width and press the
ENTER key.
Water temperature
1) Select [Inside] or [Outside] as appli-
cable and press the ENTER key.
2) Select [From] and
press the ENTER key.
3) Enter the starting tem-
perature for the alarm
and press the ENTER key.
4) Select [Span] and
press the ENTER key.
5) Enter the width for the
alarm and press the
ENTER key.
Bottom Type
Select [Rock], [Gravel], [Sand] or [Mud]
and press the ENTER key.
Starting
depth
Bottom Fish
alarm
Bottom
1) Set [Bottom] to [On] and press the EN-
TER key.
2) Select [From] and
press the ENTER key.
3) Set the starting depth
and press the ENTER
key.
4) Select [Span] and
press the ENTER key.
5) Set the width of the
alarm and press the
ENTER key.
10. Press the MENU/ESC
key to show the [FIsh School] setting win-
dow.
11. Select [Alarm] and press the ENTER key.
12. Select [On] and press the ENTER key.
Note 1: To disable an alarm, select [Off] at
step 12 in the above procedure.
Note 2: The default alarm settings can be re-
stored. Open the [Fish Alarm] setting window,
select [Reset?], press the ENTER key, select
[Yes] and press the ENTER key.
16