Furuno FCV-627 Operator's Manual page 22

3. Select [Setting] and press the ENTER
key. If you want to change the name of an
alarm, go to step 4. Otherwise go to step
6.
* Operable when corresponding
alarm is activated.
4. To change the name of the
alarm, select [Name] and
press the ENTER key.
5. Enter the name of the
alarm. (Max. of eight characters)
1) Use or to select a character. Use
to select a character in numerical
order followed by alphabet order. Use
to select a character in reverse or-
der of that with
2) Press to move the cursor to the
next place.
3) Repeat steps 1) and 2) to complete
the name.
4) Press the ENTER key to finish.
6. Select [Sound] and press the ENTER
key.
7. Select desired alarm sound and press the
ENTER key.
8. Select [Fish Type], [Temperature], [Bot-
tom Type] or [Bottom] as applicable and
press the ENTER key.
9. Do one of the following according to the
item selected at step 8.
Fish Type
1) Select [ACCU-FISH], [Fish School],
[Bottom Fish(Only BL)] or [Bottom]
and press the ENTER key.
*
*
*
.
For [ACCU-FISH] go to step 2). For
other choices go to step 6).
2) Select [From] (under
[Fish Type]) and press
the ENTER key.
3) Set the minimum fish
length and press the
ENTER key.
4) Select [Span] (be-
low [Fish Type]) and
press the ENTER
key. .
5) Set the width of the
alarm and press the ENTER key. Go
to step 8. (The maximum measure-
able fish length is 78 inch.)
6) Select [Fish Level] and press the EN-
TER key.
7) Select the echo strength that triggers
the alarm, referring to the information
below.
[Weak]: Echoes stronger than light-
blue trigger the alarm.
[Medium]: Echoes stronger than yel-
low trigger the alarm.
[Strong]: Echoes stronger than red
trigger the alarm.
8) Select the [From] that is below [Depth]
and press the ENTER key.
ACCU-FISH,
Fish School
alarms
9) Enter the width of the alarm and press
the ENTER key.
The alarm marker appears at the
starting point for the alarm. (The
marker appears only when the corre-
sponding alarm is active.) The starting
depth for the ACCU-FISH
School alarms is the transducer posi-
tion. For the Bottom Lock alarm the
starting depth is the distance from the
bottom.
15
1. OPERATION
Bottom Fish
alarm
TM
and Fish