KTM 1190 Adventure Owner's Manual page 201

20 CLEANING, CARE
–
After rinsing the motorcycle with a gentle spray of water, allow it to dry thoroughly.
–
Remove the closure of the exhaust system.
Warning
Danger of accidents Reduced braking efficiency due to a wet or dirty brake sys-
tem.
–
Clean or dry a dirty or wet brake system by riding and braking gently.
–
After cleaning, ride the vehicle a short distance until the engine warms up.
Info
The heat produced causes water at inaccessible locations in the engine and on
the brake system to evaporate.
–
Push back the protection caps of the handlebar controls to allow any water that has
penetrated to evaporate.
–
After the motorcycle has cooled off, lubricate all moving parts and bearings.
–
Clean the chain. ( p. 110)
–
Treat bare metal parts (except for brake discs and exhaust system) with corrosion
inhibitor.
Preserving materials for paints, metal and rubber (
–
Treat the painted parts with a mild paint polish.
Perfect Finish and high gloss polish for paints (
Info
Do not polish plastic parts that are matte when the vehicle is delivered as this
would seriously impair the material quality.
–
Treat the plastic parts and powder-coated parts with a mild cleaning and care product.
p. 223)
p. 223)
199