KTM 1190 Adventure Owner's Manual page 151

15 WHEELS, TIRES
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the
brake discs.
–
–
Clean screw
–
Lift the front wheel into the fork, position it, and insert the wheel spindle.
–
Mount and tighten screw
S00365-10
Guideline
Screw, front wheel spindle
–
Position the brake calipers.
The brake linings are correctly positioned.
–
Mount screws
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point. Fix the hand brake lever in the activated posi-
tion.
The brake calipers straighten.
–
Tighten screws
S00363-11
Guideline
Screw, front brake caliper
–
Remove the fixation of the hand brake lever.
Always keep the brake discs free of oil and grease, and clean them with
brake cleaner when necessary.
 
and wheel spindle
 .
M25x1.5

on both brake calipers but do not tighten yet.

on both brake calipers.
M10
.
45 Nm
(33.2 lbf ft)
45 Nm
(33.2 lbf ft)
149
Thread greased
Loctite ® 243™