KTM 1190 Adventure Owner's Manual page 155

15 WHEELS, TIRES
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the wheel bearing.
–
Clean and grease shaft seal ring
Long-life grease (
–
Clean and grease the thread of the wheel spindle and nut.
Long-life grease (
M00614-10
–
Install the rubber dampers and rear sprocket carrier on the rear wheel.
–
Place the rear wheel in the swingarm and bring the brake disc into contact with the
brake caliper.
–
Mount wheel spindle
–
Push the rear wheel as far forward as possible and place the chain on the rear sprocket.
M00615-10

and contact surface
p. 222)
p. 222)

but do not push it in all the way.
153

of the spacer.