10
Correcting burner faults
10.2 Burner faults on boilers with digital burner control unit (burner control unit MPA 50)
Any faults are indicated on the control device display.
! To reset, set the ON/OFF switch (Fig. 30, Item 2) to
"0" (OFF).
After waiting approx. 3 minutes, set the ON/OFF switch
(Fig. 30, Item 2) to "I" (ON). If the gas burner will not
start after pressing the ON/OFF switch several times
(see Chapter 11 "Troubleshooting", page 55).
We reserve the right to make any changes due to technical modifications.
Commissioning and maintenance instructions Logano GE434 Gas-fired special boiler • Issue 02/2003
54
1
Fig. 30
Logamatic 4000 control unit
Item 1: Boiler control thermostat
Item 2: ON/OFF switch
Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de
2