Cleaning The Air Filter; Installation Instructions For Stacking - Buffalo GK640GK641 Instruction Manual

CLEANING THE AIR FILTER

Clean the Air Filter regularly according to the following instructions.
The oven may have problems when the Air Filter becomes clogged with dust.
1. Remove the bolt at both ends of the Air Filter.
2. Lift the Air Filter off the post carefully.
3. Wash this filter in warm soapy water.
Bolt
4. Be sure to replace the Air Filter before using the oven.
If the Air Filter becomes clogged with debris, this will cause an overheating problem
on the oven.
If the want to change the air filter clean time, refer to "Programming Air Filter Clean
Time" in page 21.
GK640, GK641_XEU_DE68-04279A-01_EN.indd 23

INSTALLATION INSTRUCTIONS FOR STACKING

Important
1. Disconnect the power cord from the wall socket before attempting installation.
2. For stacking installation, you must use the "bracket plate" which is enclosed with
this unit.
3. The maximum stacking height is two units.
Stacking the two units is limited to the following models.
Be sure the oven cavity is empty.
CAUTION
Installation
1. Stack two units together.
2. Remove 6 screws as shown in the figure.
3. Place the Bracket-plate to join the two units.
4. Attach and tighten 6 screws as shown in the figure here.
5. Ensure the top oven is at a safe and workable height.
Bracket-Plate
English - 23
Screw
2014-08-07 2:22:46