Buffalo GK640GK641 Instruction Manual page 19

The maximum time according to each cooking power level can be referred to in the
title "Power Levels and Time Variations" on page 16. The NUMBER pads will not
operate or respond when you press a cooking time exceeding the maximum value.
It is not possible to set a cooking time for longer than the maximum time allowed on
the chosen program. It is advisable to press CANCEL and to enter a new power level
and cooking time.
Be sure to press the pads firmly in the right position.
CAUTION
Memory programs are available up to 30 items.
Make sure the unit is properly programmed.
After programming is finished, all you have to do for memory cooking is to press the
NUMBER pad. Then the selected memory program automatically starts cooking.
Multi-stage
1. Hold down PROGRAM LOCK and then press PROGRAM
pad. Hold together for 2 sec.
Result:
2. Press appropriate NUMBER pad for the desired memory
number.
Result:
3. Select power level by pressing the POWER LEVEL
SELECTOR pad or DEFROST SELECTOR pad.
Result:
4. Press NUMBER pads to set the cooking time.
GK640, GK641_XEU_DE68-04279A-01_EN.indd 19
PROG indicator appears in the digital display.
Selected memory program code appears below
the PROGRAM indicator.
Default power level HIGH appears in the
display at first press of the POWER LEVEL
SELECTOR pad.
5. Repeat steps 3 and 4 for II or III stage memory
programming.
6. Hold down PROGRAM LOCK and then press PROGRAM
pad. Hold together for 2 sec once again.
Result:
7. When you want to program more, repeat the procedures
above again.
Be sure to press the pads firmly.
Press the POWER LEVEL SELECTOR pad or DEFROST SELECTOR pad one or
more times until you get the desired power level.
The maximum time according to each cooking power level can be referred to in the
title "Power Levels and Time Variations" on page 16. The NUMBER pads will not
operate or respond when you press a cooking time exceeding the maximum value.
It is not possible to set a cooking time for longer than the maximum time allowed on
the chosen program. It is advisable to press
level and cooking time.
Be sure to press the pads firmly in the right position.
CAUTION
Memory programs are available up to 30 items.
Make sure the unit is properly programmed.
After programming is finished, all you have to do for memory cooking is to press the
NUMBER pad. Then the selected memory program automatically starts cooking.
You can not set up the same POWER LEVEL or DEFROST.
It operates as setting up sequence.
English - 19
PROG indicator and memory number indicator
blink 3 times in the digital display with a beep
sound. And then the display goes blank.
pad and to enter a new power
CANCEL
2014-08-07 2:22:41