How To Operate Memory Cooking; How To Operate Double Quantity Pad; Double Quantity Pad Programming - Buffalo GK640GK641 Instruction Manual

HOW TO OPERATE MEMORY COOKING

After having finished memory programming, just press the NUMBER pad of the memory
number you want to select. The oven will automatically start heating according to the pre-
programmed cooking time and power level.
1. Make sure the oven is plugged into a properly earthed
electrical outlet and "ON" appears in the display window.
2. Open the door.
The oven lamp will be turned on.
3. Put the food into a suitable container, place it in the centre
of the oven and then close the door securely.
Result :
4. Press NUMBER pad.
Result :

HOW TO OPERATE DOUBLE QUANTITY PAD

1. Press the Double Quantity pad.
2. Press the desired memory NUMBER pad.
Result :
You don't need to press START button to start heating.
GK640, GK641_XEU_DE68-04279A-01_EN.indd 20
The oven lamp will go off.
The selected memory program automatically
starts heating. But, NUMBER pad 1, 2, 3
operate after 2 seconds.
Cooking time which was multiplied by the preset
factor appears in the display and cooking starts
with time digits counting down.

DOUBLE QUANTITY PAD PROGRAMMING

1. Hold down
QUANTITY pad. Hold together for 2 seconds.
2. Select desired program code by using NUMBER pads.
3. Press NUMBER pads to set the magnification factor within
the range from 1.00 to 9.99.
4. Press the START button.
Default factor is 1.65 preset from the manufacturer for increasing the cooking time.
Make sure that you set a correct factor between 1.00 and 9.99 for each memory
code number.
Press pad to exit the programming mode.
Though you can successfully set a double quantity factor whose setting might result
in excess of the maximum time allowed for each power level, the oven does not
operate exceeding the maximum time.
English - 20
pad and then press the DOUBLE
CANCEL
2014-08-07 2:22:42