Oven Use; Cooking/Reheating - Buffalo GK640GK641 Instruction Manual

oven use

COOKING/REHEATING

One-stage cooking
Make sure the oven is plugged into a properly earthed electrical outlet
and "ON" appears in the display window.
Open the door (The oven lamp will be turned on.).
Put the food into a suitable container, place it in the centre of the oven and then close the
door securely (The oven lamp will go off.).
1. Select the desired power level by pressing the POWER
LEVEL SELECTOR pad.
Result:
2. Set the desired heating time by pressing the NUMBER
pads.
Result:
3. Press the START button.
Result:
4. Open the door and take the food out.
Close the door. The oven lamp will go off.
The maximum time according to each cooking power level can be referred to in the
title "Power Levels and Time Variations" on page 16. The NUMBER pads will not
operate or respond when you press a cooking time exceeding the maximum value.
It is not possible to set a cooking time for longer than the maximum time allowed
on the chosen program. It is advisable to press CANCEL and to enter a new power
level and cooking time.
GK640, GK641_XEU_DE68-04279A-01_EN.indd 15
The selected power level will be displayed in the
display window.
The selected time is displayed in the display
window.
The oven lamp and cooling fan will be turned on.
Heating will start. The time on digital display will
count down.
When all time is elapsed, the end of cycle Beep Tone will sound 4 times and all
heating will stop.
The oven lamp will go off. For 1 min, the display shows '0' and the cooling fan
will keep working in order to cool down the interior parts. During the time, the fan
will not stop even when you open the door. 1 min later it will stop. Food may be
removed from oven whilst the fan is still running.
During the time, the fan will not stop even when you open the door. 1 min later it will
stop and "ON" appears again. Food may be removed from oven whilst the fan is still
running.
Whilst in a heating cycle, one press on
the Power Check Indicator "ON" starts blinking and goes off when the
or START button is pressed again.
You can restart it by pressing the START button or a second press on
will cancel the selected program. While NOT in a heating cycle, one tap on
pad cancels the selected program.
You can press +20s pad one or more times in order to add the cooking time by 20
seconds. But you can not exceed the maximum time per power level allowed for
power level selected.
When you first plug in the power cord, the oven beeps once and all the indicators
show for 5 sec in the display window.
When heating cycle is completed and you open the door, the oven lamp
automatically turns on and goes off 1 min later.
When you open the door whilst in a heating cycle, the oven stops operating and the
oven lamp automatically turns on for 1 min and goes off 1 min later. If you leave the
oven door open for more than 1 min, the oven beeps once every minute and after
5 min the power source check indicator 'ON' appears in the display window.
English - 15
pad stops the oven. At this time,
CANCEL
CANCEL pad
pad
CANCEL
CANCEL
2014-08-07 2:22:39