Using The Defrost Feature; Memory Pads Programming - Buffalo GK640GK641 Instruction Manual

USING THE DEFROST FEATURE

The Defrost feature enables you to defrost meat, poultry or fish.
Only use containers that are microwave-safe.
Open the door. Place the frozen food in the centre of the plate tray.
Close the door.
1. Press the DEFROST SELECTOR pad to set DEFROST
HIGH or DEFROST LOW as you wish.
Result:
2. Press the NUMBER pads to set the defrosting time.
(Max. 50 min)
3. Press the START button.
Result:
It is not possible to set a defrosting time for longer than 50min. The defrost indicator
will flash and it is advisable to press
time.
When the oven was operating for longer than 25 min under Defrosting cycle, you
can NOT change the power level from Defrosting to Heating (Cooking/Reheating)
mode.
GK640, GK641_XEU_DE68-04279A-01_EN.indd 18
The DEFROST indicator appears in the display.
Defrosting begins.
pad and enter a new defrost level and
CANCEL

MEMORY PADS PROGRAMMING

One-stage
1. Hold down PROGRAM LOCK and then press PROGRAM
pad. Hold together for 2 sec.
Result:
2. Press appropriate NUMBER pad for the desired memory
number.
Result:
3. Select power level by pressing the POWER LEVEL
SELECTOR pad or DEFROST SELECTOR pad.
Result:
4. Press NUMBER pads to set the cooking time.
5. Hold down PROGRAM LOCK and then press PROGRAM
pad. Hold together for 2 sec once again.
Result:
6. When you want to program more, repeat the procedures
above again.
Be sure to press the pads firmly.
POWER LEVEL SELECTOR
Press the
more times until you get the desired power level.
English - 18
PROG indicator appears in the digital display.
Selected memory program code appears below
the PROGRAM indicator.
Default power level HIGH appears in the
display at first press of the POWER LEVEL
SELECTOR pad.
PROG indicator and memory number indicator
blink 3 times in the digital display with a beep
sound. And then the display goes blank.
DEFROST SELECTOR
pad or pad one or
2014-08-07 2:22:41