Recording A Time Lapse Movie - Casio EX-ZR62 User Manual

NOTE
• While the camera is set up for shooting with Prerecord Movie, pressing the shutter
button will not shoot a snapshot unless movie recording is in progress. With high-
definition (FHD) and standard (STD) movie, you can shoot still images while
realtime movie recording is in progress.
Recording a Time Lapse Movie (Time Lapse)
You can use this function to record movies of natural events that occur over time, to
speed up the flow of traffic in a city scene, or to record other similar types of movies.
• When using this function, shooting with a tripod is recommended.
• To prevent loss of power while shooting, use a fully charged battery.
• Make sure the memory card you are using has sufficient unused space before
shooting with this function.
• Focus is fixed at what they are when shooting is started.
• For some scenes, brightness and white balance settings are fixed at what they are
when shooting is started.
1.
In the REC mode, press [MODE].
2.
Use [8], [2], [4], and [6] to select "
[SET].
This will display a menu of Time Lapse scenes.
3.
Select the scene you want to use and then press [SET].
• To select a different scene, perform either of the operations below.
– Repeat the above procedure from step 1.
– Press [SET], use [8] and [2] to select the
option, press [SET], and then select the scene you want.
4.
Press [SET], use [8] and [2] to select the
Control Panel option, and then press [SET].
5.
Use [8] and [2] to select "
and then use [8] and [2] to change the setting.
Each scene is initially configured with unique "
default settings suitable for that scene. You can change these settings, if you
want.
Interval
Total Time
Interval" or "
Specifies the number of seconds between shots.
Specifies the recording time. Selecting "Off" causes
recording to continue until the shutter button is pressed
again.
76
" (Time Lapse), and then press
(Time Lapse) Control Panel
(Time Lapse Settings)
Total Time", press [6],
Interval" and " Total Time"
Recording Movies