Garmin AERA 660 Pilot's Manual page 95

Selecting an approach using the Direct To function:
1) Touch the Direct To Icon.
2) Touch the Menu Icon.
3) Touch Select Approach (only available when navigating a flight plan.
4) Touch to display a list of approaches.
5) Touch the desired approach.
6) Touch Load Approach, Activate Approach, or Activate Vectors-to-
Final. The designated transition waypoints are added to the flight plan.
Resuming the Flight Plan after activating an approach:
Whenever an approach is selected and activated the procedure is added to the end
of the flight plan and the aera immediately begins to provide guidance to the first
waypoint in the approach. Follow the steps below to resume the flight plan after
activating the approach.
1) From the Main Menu, touch Active Flight Plan.
Or:
Touch the Direct To Icon.
2) With a flight plan and an approach activated, touch the Menu Icon.
3) Touch Resume Flight Plan.
Removing an approach:
1) From the Main Menu, touch Active Flight Plan.
Or:
a) From the Main Menu, touch Flight Plan List.
b) Touch the desired Flight Plan from the list. An option menu appears.
c) Touch Edit.
2) With the flight plan displayed, touch Menu.
3) Touch Remove (only available if an approach is loaded).
190-02017-20 Rev. A Garmin aera 660 Pilot's Guide
Flight Planning
79