Garmin AERA 660 Pilot's Manual page 152

Appendix D
Reconfiguring the yoke mount for center column yokes:
1) Loosen and remove the Cradle Adjustment Knob, spacer, and rubber
washer.
2) Rotate the clamp assembly 90
you.
3) Secure the clamp assembly to the rest of the yoke mount using the Cradle
Adjustment Knob, spacer, and rubber washer. Adjust the clamp angle
before fully tightening the Cradle Adjustment Knob.
Clamp
Assembly
136
so that the clamp opening faces away from
o
Yoke Mount in Conventional Configuration
Rubber Washer
Yoke Mount in Forward-Facing Configuration
Garmin aera 660 Pilot's Guide
Cradle
Adjustment
Knob
Spacer
190-02017-20 Rev. A