KTM 1190 Adventure Owner's Manual page 173

16 ELECTRICAL SYSTEM
–
Remove the passenger seat. (
–
Remove the driver's seat. (
–
Remove the front side cover. (
–
Remove the tank cover. (
–
Remove the mask spoiler.
–
Remove the wind shield. (
–
Remove the headlight mask with the headlight. (
Main work
–
Push headlight bulb
wise, and pull it out.
–
Unplug connector
S00297-10
–
Plug connector
Low beam (H11/socket PGJ19-2) (
–
Position headlight bulb
The headlight bulb is locked into the bulb socket.
S00298-10
Finishing work
–
Refit the headlight mask with the headlight. (
p. 103)
p. 104)
p. 117)
p. 125)
( p. 119)
p. 128)

lightly into the bulb socket, turn it all the way counterclock-

.
 into the new headlight bulb.
p. 210)

into the bulb socket and turn it all the way clockwise.
p. 168)
p. 169)
171