Indicator Lamps - KTM 1190 Adventure Owner's Manual

Hide thumbs Also See for 1190 Adventure:
Table of Contents

Advertisement

7
COMBINATION INSTRUMENT
45
7.5

Indicator lamps

Possible states
The high beam indicator lamp lights up blue – The high beam is switched
on.
The immobilizer indicator lamp lights up/flashes red – Status or error mes-
sage for immobilizer/alarm system.
The oil pressure warning lamp lights up red – Engine oil pressure is too
low.
The general warning lamp lights up yellow – An operating safety (warning)
401813-01
message was detected. This is also shown on the matrix display.
The left turn signal lamp flashes green simultaneously with the turn signal
– The left turn signal is switched on.
The idle indicator lamp lights up green – The transmission is shifted to
idle.
The right turn signal lamp flashes green simultaneously with the turn signal
– The right turn signal is switched on.
The engine warning lamp lights up/flashes yellow – The engine control unit
has detected a fault.
The ABS lamp lights up/flashes yellow – ABS is not active. The ABS lamp
also lights up when a fault is detected.
The TC lamp lights up/flashes yellow – Traction control is not enabled or is
currently intervening. The TC lamp also lights up when a fault is detected.

Advertisement

Table of Contents
loading

Table of Contents