Canon MG2500 series Online Manual page 31

Click Specify... and specify the following settings in the Booklet Printing dialog box,
and then click OK.
Margin for stapling
Select which side should the stapling margin be on when the booklet is completed.
Insert blank page
To leave one side of a sheet blank, check the check box, and select the page to be
left blank.
Margin
Enter the margin width. The specified width from the center of the sheet becomes the
margin width for one page.
Page Border
To print a page border around each document page, check the check box.
5. Complete the setup
Click OK on the Page Setup tab.
When you execute print, the document will be printed on one side of a sheet of
paper. When the printing of one side is complete, set the paper correctly by following
the message and click OK.
When the printing of the other side is complete, fold the paper at the center of the
margin and make a booklet.
Important
Booklet cannot be selected when a media type other than Plain Paper is selected for
Media Type on the Main tab.
Note
The stamp and background are not printed on the inserted blank sheets with the
Insert blank page function of booklet printing.
31