Canon MG2500 series Online Manual page 28

5. Complete the setup
Click OK on the Page Setup tab.
When you execute print, the document will be divided into several pages during
printing.
Printing Only Specific Pages
If ink becomes faint or runs out during printing, you can reprint only the specific pages by
following the procedure below:
1. Set the print range
In the settings preview on the left of the Page Setup tab, click the pages that do not
need to be printed.
The pages that were clicked are deleted, and only the pages to be printed are
displayed.
Note
Click the deleted pages to display them again.
Right-click the settings preview to select Print all pages or Delete all pages.
2. Complete the setup
After completing the page selection, click OK.
When you execute print, only specified pages will be printed.
28