Do you have a question about the PIXMA MG2500 Series and is the answer not in the manual?
Questions and answers
Martin Holdsworth
March 17, 2025
What USB cable to I use for Canon Pixma MG2551S series printer?
1 comments:
Mr. Anderson
May 14, 2025
The Canon Pixma MG2551S series printer is compatible with a standard USB Type-B to USB Type-A cable.
This answer is automatically generated
Martin Holdsworth
March 17, 2025
Just got a Canon Pixma MG 2551S printer
1 comments:
Mr. Anderson
May 14, 2025
To set up the Canon Pixma MG 2551S printer, follow these steps:
1. Power Connection: Plug in the AC cable to the printer and connect it to a power source.
2. Turn On the Printer: Press the ON button. Ensure the ON lamp lights green.
3. Install Ink Cartridges: - Insert the FINE cartridges into their slots at an angle. - Push them in and up firmly until they snap into place. - Be careful of ink on the protective tape.
4. Connect to Computer: - Do not connect the USB cable before installing the driver. - After connecting the printer to a power source and turning it on, plug the USB cable into the printer and your computer.
5. Install Driver: - Download and install the required driver on your computer. - Follow on-screen instructions to complete the installation.
6. Check for Errors: - If the Alarm lamp flashes orange, turn off the printer and repeat the setup steps.
This answer is automatically generated
Diane
July 9, 2025
do i have to buy the ink or does it come w/printer
Page 2
Repeat to install the other FINE Cartridge. Répétez les étapes à pour installer l'autre cartouche FINE. Install the software on your devices. Installez le logiciel sur vos périphériques. Load paper with the print side facing up. Manuals Chargez le papier face à imprimer vers le haut.
Need help?
Do you have a question about the PIXMA MG2500 Series and is the answer not in the manual?
Questions and answers
What USB cable to I use for Canon Pixma MG2551S series printer?
The Canon Pixma MG2551S series printer is compatible with a standard USB Type-B to USB Type-A cable.
This answer is automatically generated
Just got a Canon Pixma MG 2551S printer
To set up the Canon Pixma MG 2551S printer, follow these steps:
1. Power Connection: Plug in the AC cable to the printer and connect it to a power source.
2. Turn On the Printer: Press the ON button. Ensure the ON lamp lights green.
3. Install Ink Cartridges:
- Insert the FINE cartridges into their slots at an angle.
- Push them in and up firmly until they snap into place.
- Be careful of ink on the protective tape.
4. Connect to Computer:
- Do not connect the USB cable before installing the driver.
- After connecting the printer to a power source and turning it on, plug the USB cable into the printer and your computer.
5. Install Driver:
- Download and install the required driver on your computer.
- Follow on-screen instructions to complete the installation.
6. Check for Errors:
- If the Alarm lamp flashes orange, turn off the printer and repeat the setup steps.
This answer is automatically generated
do i have to buy the ink or does it come w/printer