Canon MX390 series Online Manual page 91

Errors When You Receive a Fax
If an error occurs when you receive a fax, the error number is printed on RX REPORT (there are some
errors for which the cause is also printed).
The causes corresponding to the error numbers are as follows.
No.
It takes too long to receive
#003
a page.
#005 No answer.
#037 Memory is full.
Reception has been
rejected due to the
#046
specified fax rejection
condition.
The Stop button was
#099
pressed during reception.
Cause
Contact the sender and have the sender divide the fax or set
the image quality (Fax resolution) to a lower setting and
resend it.
When receiving a fax manually, the machine could not detect
the signals from the sender's fax machine.
Contact the sender and have the sender resend it, or set the
machine to receive the fax automatically.
The machine could not receive a fax because its memory is
full.
Delete contents in memory, then ask the sender to resend the
fax. See
Reception has been rejected because the fax matches the
fax rejection condition specified by FAX RX reject in
Security control under Fax settings.
For details, see
The Stop button was pressed to cancel reception of the fax.
Contact the sender and have the sender resend it if
necessary.
Action
Document Stored in Machine's
Rejecting Fax Reception.
Memory.