Canon MX390 series Online Manual page 66

• When Fax only mode is selected:
When the call is a fax:
• When DRPD or Network switch is selected:
When the call is a fax:
When the call is a voice call:
Pick up the handset, and talk on the telephone.
Note
If the machine unexpectedly switches to fax reception
during telephone calls, set User-friendly RX of the
advanced setting to OFF.
If Manual/auto switch of the advanced setting is set to
ON, you must answer an incoming call by picking up the
handset within the time specified in RX start time.
Otherwise the machine will switch to fax reception.
The machine will receive the fax automatically.
Note
If a telephone is connected to the machine, the
telephone will ring when a call incomes.
You can change the number of times to ring the
telephone with Incoming ring of the advanced setting.
The telephone will ring when a call incomes.
The machine will receive the fax automatically when the fax
ring pattern is detected.
Note
You can change the number of times to ring the
telephone.
Advanced Settings of Receive Mode
The telephone will ring when a call incomes.
When the machine does not detect the fax ring pattern, the
telephone will continue ringing.
Pick up the handset, and talk on the telephone.
Note
To use this feature, you need to subscribe to a
compatible service provided by your telephone company.
For DRPD
You need to select the appropriate ring pattern on the
machine.
Setting the DRPD Ring Pattern (US and Canada only)
For Network switch