Reviewing Previously Stored Temperature Data - Omega Engineering OS550 Series User Manual

3.6.3 Reviewing Previously Stored Temperature Data

(OS553, OS554)
You can review all 100 stored temperature values on the
thermometer display using the following procedure:
°F
1.
2.
3.
4.
5.
Using the Infrared Thermometer/Transmitter
With power applied to the unit, place the SLEEP/ON
switch to the SLEEP position
Press and hold the
Display Mode (MEM) appear.
Press the
press the
The memory location can be from 001 to 100.
Press the
the lower portion of the display. If there is no data stored
in a memory location, the display shows "----" .
To review other stored temperatures, repeat Steps 3
and 4.
If no keys are pressed, the thermometer goes back into
sleep mode in approximately 10 second
key until you see the Memory
key to increment the memory location or
key to decrement the memory location.
key. The stored temperature is shown in
NOTE
3
3-29