Table of Contents
Advertisement
6.5.6
System Resume Timer Mode
When enabled, the notebook resumes from standby mode at the specified
Resume Date and Resume Time parameter settings.
6.5.7
System Resume Date and Time
The Resume Date and Resume Time parameters let you set the date and
time for the resume operation. The date and time fields take the same
format as the System Date and Time parameters in the Basic System
Settings screen.
6.5.8
Modem Ring Resume On Indicator
When enabled, the notebook wakes up from standby mode and returns to
normal mode when a PCMCIA modem detects a ringing tone. The default
setting is
Setup
When the notebook is in hibernation mode, it cannot resume
when this parameter is enabled.
Setting a resume date and time that is not valid automatically
disables these fields. A successful resume occurring from a
date and time match automatically disables these fields.
.
[Enabled]
When the notebook is in hibernation mode, it cannot resume
from a modem ring.
6-17
Advertisement
Table of Contents
Troubleshooting
