6.5
Power Management Settings
Besides accessing this screen from POST (F2), you can also press Fn-F6
during runtime (system operation) to access this section of the BIOS Utility.
Power Management Mode ------------- [Enabled]
Display Standby Timer ------------- [ 1] Minute(s)
Hard Disk Standby Timer ----------- [ 1] Minute(s)
System Sleep Timer ---------------- [ 3] Minute(s)
System Sleep Mode ----------------- [Hibernation]
System Resume Timer Mode ---------- [Disabled]
System Resume Date ---------------- [--/--/----]
System Resume Time ---------------- [--:--:--]
Modem Ring Resume On Indicator ---- [Enabled]
Battery-low Warning Beep ---------- [Enabled]
Sleep Upon Battery-low ------------ [Enabled]
=Move Highlight Bar,
6.5.1
Power Management Mode
With enabled, all the power management timers take effect unless
specifically disabled by the user. Select
timers. The default setting is
Setup
Power Management Settings
[Enabled]
You cannot disable this parameter in BIOS Utility if APM is
installed under DOS, Windows or Windows 95.
APM, type
Power Off
in the Windows Control Panel.
=Change Setting, F1=Help, Esc=Exit
[Disabled]
.
under DOS, or disable the Power icon
to turn off all the
To disable
6-15