Table of Contents
Advertisement
1.3
Connecting the Notebook
After reading through the previous section, you are now ready to experience
your new notebook. Connecting the notebook is as easy is 1-2-3.
Getting Started
To turn off power, press the power switch for more than four
seconds. If you are using Windows 95, we recommend you
use the Shutdown command to turn off the computer.
Inserting the Battery Pack
Insert the battery pack into the
battery compartment and slide the
battery compartment cover in place.
NiMH battery packs have pull loops
at the end.
You do not need to
connect the cover to the battery.
Connecting the AC Adapter
Connect one end of the AC adapter
to the DC-in port on the notebook' s
rear panel and the other end to a
properly grounded power outlet.
Turning on the Power
Press the power switch to turn on
the power.
The POST (Power On Self-Test)
routine executes and Windows 95
begins loading.
1-9
Advertisement
Table of Contents
Troubleshooting
