Harbor Breeze 40107 Installation Manual page 15

FINAL INSTALLATION
3. Partially insert three blade screws (II) along with the
three blade washers (JJ) and three rubber washers
(LL) to attach one blade arm (H) to a blade (I).
Tighten each blade screw (II), starting with the one in
the middle. Repeat for each blade (I).
Hardware Used
II
Blade Screw
JJ
Blade Washer
Rubber
LL
Washer
4. Slide the blade arm (H) onto the motor screws (AA)
and under the spring washers (KK) on the underside
of the motor assembly (E). Repeat for the remaining
blade arms (H). Tighten all motor screws (AA)
securely.
Hardware Used
AA
Motor Screw
KK
Spring Washer
5. Attach the pull chain extension (CC) or custom pull
chain extension (not included) to the fan pull chain.
Hardware Used
Pull Chain
CC
Extension
3
x 15
x 15
x 15
4
H
x 10
x 10
5
x 1
15
LL
H
Lowes.com/harborbreeze
II
JJ
I
E
KK
AA
CC