Wiring - Harbor Breeze 40107 Installation Manual

WIRING

WARNING: To reduce the risk of fire, electrical shock, or personal injury, wire connectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from
the fan. If your house wire is larger than 12 gauges and there is more than one house wire to connect
to the two fan lead wires, consult an electrician for the proper size wire connectors to use.
CAUTION: Be sure the outlet box is properly grounded or that a Ground (Green or Bare) wire is present.
1. Connect with supply and fan wires according to the
diagram and these steps:
• Connect the Green wire from the downrod (A) and
mounting bracket (C) to the Bare/Green supply
wire.
• Connect the White wire from the fan to the White
supply wire.
• Connect the Black and Blue wires from the fan to
the Black supply wire.
• Secure all wiring connections together with wire
connectors (BB).
Note: The Black wire is hot power for the fan. The White
wire is common for the fan and light kit. The Blue
wire is hot power for light (sold separately; wiring
instructions will differ if optional light kit is purchased.
Refer to light kit manufacturer's instructions).
The Green wire is the ground wire. If house wires
are different colors than referred to above, stop
immediately. It is recommended a professional
electrician determines the proper wiring.
Hardware Used
BB
Wire Connector
2. Wrap electrical tape (not included) around each
individual wire connector (BB) down to the wire.
Hardware Used
BB
Wire Connector
3. Turn the spliced/taped wires upward and gently push
the wires and wire connectors (BB) into the outlet box.
WARNING: Ensure no bare wire or wire strands
are visible after making connections. Place the
Green and White wire connections on the opposite
side of the outlet box from the Black and Blue wire
connections.
1
2
BB
x 3
3
x 3
13
Black
White
Bare/Green
Fan
BB
BB
BB
Lowes.com/harborbreeze