Specifications - Black & Decker GC1200 Instruction Manual

of metal dust can cause tracking of electrical current from
the internal parts to exposed metal parts.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the
tool, remove the battery from the tool. Unplug the charger
before cleaning it.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
Warning! The use of any accessory not recommended
for use with this tool could be hazardous.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste. Should
you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
BATTERIES
BLACK+DECKER batteries can be recharged
many times. At the end of their useful life,
discard batteries with due care for our
environment:
f Run the battery down completely, then remove it from
the tool.
f NiCd, NiMH and Li-Ion batteries are recyclable.
Take them to any authorized repair agent or a local
recycling station.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. For
more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location
nearest you, or visit us at www.BlackandDecker-la.com

SPECIFICATIONS

Voltaje
No-load speed
Max. torque
Chuck capacity
Max drilling capacity
Steel
Wood
Weight
BATTERIE
Voltaje
Capacity
Weight
CHARGER
AR, B2C
B3
BR
Tiempo de carga
ENGLISH • 17
GC1200
12V
0 - 750/min (rpm)
97in-lb (11Nm)
3/8" (10mm)
3/8" (10mm)
1" (25mm)
0,9kg
A12E
12V
1,2Ah
0,47kg
220V ~ 50Hz
120V ~ 60Hz
127V/220V ~ 60Hz
3hr