Specifications; Troubleshooting; Service Information - Black & Decker LD108 Instruction Manual

Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.

SPECIFICATIONS

Voltage
No-Load speed
Chuck
Torque
Battery type
CHARGER
Input
Output
Charging time
* Maximum initial battery pack voltage (Measured without
a workload) is 8 volts. Measured under a workload,
nominal voltage is 7.2.
PROBLEM
Unitwill not start.
Battery packwill not charge.

SERVICE INFORMATION

BLACK+DECKER offers a full network of company-owned and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service.
For more information about our authorized service centers and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location nearest you, or visit us at www.BlackandDecker-la.com
LD108/LDX172PK
8V MAX*
550/min (rpm)
3/8" (10mm)
60 in-lbs (13,3Nm)
Lithium Ion
6W
10V 120mA
12-15 hours

TROUBLESHOOTING

POSSIBLE CAUSE
Battery pack not charged.
Charger not plugged in.
Surrounding air temperature too hot
or too cold.
ENGLISH • 19
POSSIBLE SOLUTION
Check battery pack charging
requirements.
Plug charger into aworking outlet.
Refer to "Important Charging Notes"
formore details.
Move charger and battery pack to a
surrounding air temperature
of above 40°F (4.5°C) or below 105°F
(+40.5°C).