Maintenance; Service Information; Specifications - Black & Decker TB555 Instruction Manual

12 • ENGLISH
Selecting the drilling mode
f For drilling in masonry, set the drilling mode selector
(4) to the position.
f For drilling in other materials and for screwdriving, set
the drilling mode selector to the position.
Switching on and off
f To switch the tool on, press switch (1). For variable
speed units, the tool's speed depends on how far
you press the switch. As a general rule for variable
speed units, use low speeds for large diameter drill
bits and high speeds for smaller diameter drill bits.
f For continuous operation, press the lock-on button
(2) and release the variable speed switch. This option
is available only at full speed. This option does not
work in reverse rotation.
f To switch the tool off, release the switch. To switch the
tool off when in continuous operation, press the variable
speed switch once more and release it.
Forward/Reverse lever switch lock
f The forward/reverse lever switch determines
the rotation direction of the tool and off button.
f To select forward rotation, release the trigger switch
and push the forward/reverse lever switch to the left
side of the tool.
f To select reverse, push the forward/reverse lever
switch to the right side of the tool.
f When changing the position of the lever switch
be sure the trigger switch is released and the motor
is stationary.
Variable speed trigger
f The variable speed trigger provides a safety feature
to the user when driving screws.
f You can use this trigger to vary the speed.
f The trigger is sensitive to tighten, press harder
to accelerate.

MAINTENANCE

Your tool has been designed operate over a long period of
time with minimum of maintenance. Continuous satisfactory
operation depends proper tool care and regular cleaning.
¡Warning! Before performing any maintenance, switch
off and unplug the tool.
f Regularly clean the ventilation slots in your tool using
a soft brush or dry cloth.
f Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
ACCESORIOS
Los accesorios que se recomiendan para la herramienta
están disponibles en su distribuidor local o en el centro
de mantenimiento autorizado.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.

SERVICE INFORMATION

BLACK+DECKER offers a full network of company-owned
and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location
nearest you, or visit us at www.BlackandDecker-la.com

SPECIFICATIONS

Power input
No-load speed
Blows per minute
Max. drilling capacity:
Steel
Concrete
Wood
Weight
TB555
550W
0 - 2900/min (rpm)
0 - 46400gpm (bpm)
1/2" (10mm)
1/2" (10mm)
31/32" (25mm)
1,6kg