Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Black & Decker Hammer Drill
Summary of Contents for Black & Decker Hammer Drill
- Page 1 Ireland Australia New Zealand...
- Page 2 14 15 16 15 17...
-
Page 3: Intended Use
Intended use b. Use safety equipment. Always wear eye protection. Your Black & Decker hammer drill has been designed for drilling Safety equipment such as dust mask, non-skid safety in wood, metal, plastics, and masonry as well as for screwdriving shoes, hard hat, or hearing protection used for purposes. - Page 4 Use of the power tool for operations different from those Fitting a drill bit or screwdriver bit intended could result in a hazardous situation. KR60(L)/KR70(L) - Keyless chuck (fig. B) 5. Service Open the chuck by turning the front part (12) with one a.
-
Page 5: Protecting The Environment
Selecting the direction of rotation To clean the tool, use only mild soap and a damp cloth. For drilling and for tightening screws, use forward (clockwise) Never let any liquid get inside the tool and never immerse rotation. For loosening screws or removing a jammed drill bit, any part of the tool into liquid. -
Page 6: Ec Declaration Of Conformity
EC declaration of conformity KR60/KR70 Black & Decker declares that these products conform to: 98/37/EC, 89/336/EEC, 73/23/EEC, EN 55014, EN 60745, EN 61000 (sound pressure) 97.3 dB(A), (acoustic power) 108.3 dB(A), hand/arm weighted vibration 10.7 m/s (sound pressure uncertainty) 3 dB(A), (acoustic power uncertainty) 3 dB(A) Kevin Hewitt Director of Consumer Engineering... - Page 7 KR60 - KR60L - KR60QC KR60 KR60QC KR60L KR60QC KR60 - KR60L KR60 - KR60L KR60L KR60 - KR60QC E13603 WWW.2helpU.com 17 - 04 - 03...
- Page 8 KR70 - KR70L - KR70QC KR70 KR70QC KR70 - KR70L KR70L KR70QC KR70L KR70 - KR70QC KR70QC KR70 - KR70L E13604 WWW.2helpU.com 17 - 04 - 03 615560-00 09/05...
- Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnston Drive Fax 09 579 8200 Penrose, Auckland, New Zealand United Kingdom Black &...
Need help?
Do you have a question about the Hammer Drill and is the answer not in the manual?
Questions and answers
How do you disable the hammer action on a Black & Decker Macho PCO hammer drill, so that it can be used as only a drill/screwdriver?
To disable the hammer action on a Black & Decker hammer drill, set the drilling mode selector to the standard drilling position (not the masonry mode). This is typically done by turning the mode selector switch away from the hammer icon.
This answer is automatically generated