Table of Contents
Advertisement
SAFETY INSTRUCTIONS
WARNING
If a steel tank is installed on a wooden
or FRP vessel, take appropriate
measures to prevent electrolytic
corrosion.
Electrolytic corrosion can damage the
hull.
Be sure to power each unit with proper
voltage.
Connection of an improper power supply
can cause fire or damage the equipment.
DANGER
Keep fingers away
from gears.
Shaft may cause injury.
Keep away from
moving shaft.
ii
Name
Warning Label
Type
10-071-5313
Code No. 100-291-160-10
CAUTION
Maximum speed while the transducer is
projected or being raised or lowered
is as below, to prevent damage to the
transducer.
Projected
1200 mm stroke Max. 18 kn Max. 15 kn
1600 mm stroke Max. 15 kn Max. 12 kn
Ground the equipment to prevent
electrical shock and mutual
interference.
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Standard
compass
Processor Unit
1.45 m
Control Unit
0.35 m
FSV-8501
0.80 m
IF Unit
Sub Control Unit
0.90 m
FSV-853
Raising/
Lowering
Steering
compass
0.90 m
0.30 m
0.50 m
0.55m
- Quick Links:
- Hull Unit
Hide quick links:
Advertisement
Table of Contents
