Furuno FSV-35 Installation Manual page 16

1. HOW TO INSTALL THE SYSTEM
2. Make holes for four self-tapping screws (M5x20).
3. Peel the tape from the F mount gasket then attach the gasket to the rear of the
control unit.
4. Connect a ground wire (1.25sq, local supply) between the ground terminal at the
bottom of the unit and ship's ground.
5. Set the unit to the cutout and fasten it with four self-tapping screws (M5x20) and
wave washers.
6. Set cosmetic caps to fixing holes.
1.3.2 Sub Control Unit FSV-853 (option)
Desktop installation, with keyboard fixture
Name
Keyboard fixture
Washer head screw
Rubber foot
1. Fix the keyboard fixture to the bottom of the unit with the screws (M4x12) supplied.
2. Attach rubber feet (2 pcs.) to the bottom of the unit.
3. Fix the unit to the mounting location with self-tapping screws (local supply).
Desktop installation, no keyboard fixture
1. Drill four mounting holes of 5 mm diameter, referring to the outline drawing at the
back of this manual.
2. Fix the unit with four screws (M4) from under side of the desktop. (Supply the
screws locally. Be sure the screws are of a sufficient length for the thickness of
the desktop.)
1-10
Type
03-163-7821-1
M4x12 C2700W MBN12
M5x40
Keyboard fixture
Code No.
100-306-291-10
000-163-192-10
000-162-682-10
Rubber feet
Qty
1
6
2