Canon MX450 series Online Manual page 49

Long narrow items such as panoramic photos
Reflective disc labels may not be scanned as expected.
Place items correctly according to the type of item to be scanned. Otherwise, items may not be
scanned correctly.
See "Placing Items (When Scanning from a
When scanning two or more documents from the ADF (Auto Document Feeder), place
documents of the same size even if Auto is set.
Note
To convert text in the image into text data after scanning, specify Select Source instead of
selecting Auto.
To reduce moire, set Select Source to Magazine.
• Color Mode
Select the color mode in which to scan the item.
Important
To select Black and White, deselect the Compress scanned images upon transfer checkbox.
Note
Only Color is available when Select Source is Auto.
• Paper Size
Select the size of the item to be scanned.
When you select Custom, a screen in which you can specify the paper size appears. Select a Unit,
then enter the Width and Height, and then click OK.
Note
Only Auto is available when Select Source is Auto.
Click Defaults in the screen in which you can specify the paper size to restore the specified
settings to the default settings.
• Resolution
Select the resolution of the item to be scanned.
The higher the resolution (value), the more detail in your image.
Resolution
Note
Only Auto is available when Select Source is Auto.
• Document Scan Orientation Settings...
This appears when you select ADF or Auto for Select Source.
Click to display the Document Scan Orientation Settings dialog in which you can set the orientation
and binding side of the documents to be scanned from the ADF.
Computer)" for details on how to place items.