Scanning In Advanced Mode - Canon MX450 series Online Manual

Scanning in Advanced Mode

Use the Advanced Mode tab to specify the color mode, output resolution, image brightness, color tone,
etc. when scanning.
See "Scanning Multiple Documents at One Time with ScanGear (Scanner
documents at one time.
See "Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced
multiple documents placed on the ADF (Auto Document Feeder).
Important
The following types of documents may not be scanned correctly. In that case, click
on the Toolbar to switch to whole image view and scan.
Photos that have a whitish background
Documents printed on white paper, hand-written text, business cards, etc.
Thin documents
Thick documents
The following types of documents may not be scanned correctly.
Documents smaller than 1.2 inches (3 cm) square
Photos that have been cut to various shapes
1. Place the document on the Platen, then start ScanGear (scanner driver).
Placing Items (When Scanning from a Computer)
Starting ScanGear (Scanner Driver)
2. Click the Advanced Mode tab.
The tab switches to Advanced Mode.
Note
Settings are not retained when you switch modes.
3. Set Input Settings according to the document or purpose.
Input Settings
4. Click Preview.
Driver)" to scan multiple
Mode" to scan
(Thumbnail)