Canon MX450 series Online Manual page 162

About IJ Network Scanner Selector EX
If ScanGear (scanner driver) is installed, IJ Network Scanner Selector EX starts automatically to enable
scanning over a network from your computer or the operation panel of your scanner. Follow the procedure
below to change the settings so as not to start IJ Scanner Selector EX automatically.
Important
IJ Network Scanner Selector EX can be set not to start automatically; however, if IJ Network Scanner
Selector EX is not running, you cannot transfer images scanned from the operation panel to a
computer over a network.
1. Select System Preferences... from the Apple.
2. Click Users & Groups from System, select a user name from Current User, then
select Login Items.
In Mac OS X v.10.6.x, click Accounts from System, select a user name from My Account, then
select Login Items.
3. Select Canon IJ Network Scanner Selector EX, then click -.
4. Confirm that Canon IJ Network Scanner Selector EX is hid, then restart your
computer.
Important
Even if IJ Network Scanner Selector EX does not start automatically, you can print over a network
and scan from a computer; however, if IJ Network Scanner Selector EX is not running, you cannot
transfer images scanned from the operation panel to a computer over a network.
To start IJ Network Scanner Selector EX automatically again, follow either of the procedure below.
Click + in the step 3. Then click Applications > Canon Utilities > IJ Network Scanner Selector
EX, select Canon IJ Network Scanner Selector EX, and click Add. Then restart your computer.
Select Preferences... from the Canon IJ Network Scanner Selector EX menu, then select the
Enables scanning from the operation panel checkbox.