Table of Contents
Advertisement
TECHNICAL MANUAL LEON CUP RACER
After any intervention, fix the wishbone regulator plate bolts in the right tighten.
Maintain the wishbone regulation plate clean and little oiled between plates.
Front regulation table (rough values).
Camber
-6
-5,5
-5
-4,5
-4
-3,5
3
4.5
Rear Camber and Toe adjustment
How to proceed to adjust camber and toe
1.
Car ride height. Put the ride height at your choice through
damper/spring adjustments.
2.
Camber. To change the camber is recommended to move the
"boomerang" arm.
3.
Toe. To change the toe enlarge or reduce the rear arm.
4.
Check and adjust a second time if necessary.
The rear Camber regulation does not have relation with the toe movement, so you can change rear
camber without any toe movement.
After the camber adjustment job, check that the ball-joint is placed in the middle of its housing.
Rear Camber value vs rear camber regulation screw turn.
Camber
Toe regulation
10,5 Turns
7 Turns
3,5 Turns
0
-3,5 Turns
-6,5 Turns
-10 Turns
Camber arm regulation
-2
-2,5
-3
-3,5
-4
-4,5
-5
Wishbone regulation
1,5 turns = 10' camber
13 Turns
8,3 Turns
4,5 Turns
0
-4 Turns
-8 Turns
-12,5 Turns
1,5 Turns
1 Turns
0,5 Turns
0
-0,5 Turns
-1 Turns
-1,5 Turns
28 de 44
Advertisement
Table of Contents
