Remote Control - Denon PMA-2500NE Owner's Manual

Contents Connections
e r t y u
C Remote control sensor
This receives signals from the remote control unit. (v p. 5)
D ANALOG MODE button
This turns the ANALOG MODE 1/2 on/off. (v p. 29)
E ANALOG MODE indicator
This is lit as follows according to the ANALOG MODE status:
ANALOG MODE 1/2 on: Green
0
ANALOG MODE off: Off
0
Front panel Rear panel
Playback
i o Q0

Remote control

unit
Settings
F SOURCE DIRECT indicator
This is lit as follows according to the SOURCE DIRECT status:
SOURCE DIRECT mode on: Green
0
SOURCE DIRECT mode off: Off
0
G SOURCE DIRECT button
This turns SOURCE DIRECT mode on/off. (v p. 29)
H VOLUME knob
These adjust the volume level. (v p. 27)
I Display
This displays information such as the input source name, type of digital
audio signal and sampling frequency.
J Input source select knob (INPUT SELECTOR)
This selects the input source. (v p. 27)
NOTE
0 When you set this unit's input source to "EXT.PRE", the main unit outputs at
maximum volume. Also adjustment of the volume balance and tone on the
main unit has no effect. Adjust the volume on the inputting devices before
playback.
8
Index
Tips Appendix